Quick Start
Here you will find out briefly how to set up and use flashers correctly. You can find more details on how to use your turn signal bracelets in our explanatory videos below.
Thanks to the patented snap fastener, you can quickly and easily put the flasher bracelets on your upper arm just above your elbow. Make sure the lights are pointing straight forward or back as you hang your arms next to you. If necessary, turn it forward a little so that the indicator comes on particularly easily.
Press the button on both bracelets firmly to turn them on. Each bracelet vibrates once as soon as it is switched on and briefly shows you the battery level via LED. IMPORTANT : Don't be afraid to press really hard, because the button is set extra harder so that the LED bracelets cannot turn on by themselves when you carry them in your bag.
The two bracelets are smart and automatically connect to each other. To do this, you have to switch on both bracelets within two minutes. Once connected, they react in tandem. If you change the mode on one bracelet, the other automatically changes with it. If you turn one off, the other turns off too.
You activate Flasher's turn signal by swinging your elbow forward and up. IMPORTANT : Always keep both hands on the handlebars. The bracelet vibrates to let you know the turn signal is on. By the way, there are two different ways you can flash with a flasher: short and long. Find out more in the video below or in our Questions & Answers .
You can also get the bracelets off your arms quickly and easily. To do this, simply grab the hard part in the middle and pull it off your arm. Don't worry, they are really sturdy. You can't break anything here.
Whether you turn it off before or after is a matter of taste. You can tell that they are switched off when each bracelet briefly vibrates twice.
Thanks to the patented snap fastener, you can quickly and easily put the flasher bracelets on your upper arm just above your elbow. Make sure the lights are pointing straight forward or back as you hang your arms next to you. If necessary, turn it forward a little so that the indicator comes on particularly easily.
Press the button on both bracelets firmly to turn them on. Each bracelet vibrates once as soon as it is switched on and briefly shows you the battery level via LED. IMPORTANT : Don't be afraid to press really hard, because the button is set extra harder so that the LED bracelets cannot turn on by themselves when you carry them in your bag.
The two bracelets are smart and automatically connect to each other. To do this, you have to switch on both bracelets within two minutes. Once connected, they react in tandem. If you change the mode on one bracelet, the other automatically changes with it. If you turn one off, the other turns off too.
You activate Flasher's turn signal by swinging your elbow forward and up. IMPORTANT : Always keep both hands on the handlebars. The bracelet vibrates to let you know the turn signal is on. By the way, there are two different ways you can flash with a flasher: short and long. Find out more in the video below or in our Questions & Answers .
You can also get the bracelets off your arms quickly and easily. To do this, simply grab the hard part in the middle and pull it off your arm. Don't worry, they are really sturdy. You can't break anything here.
Whether you turn it off before or after is a matter of taste. You can tell that they are switched off when each bracelet briefly vibrates twice.
Click here for the new Flasher app
Video tutorials
How to use Flasher
Quick Start
The closure
use
Load
General